DESCRIPTION :
E.MIX Finish is high quality water resistant cement-based thin plaster for finishing walls and ceilings. E.MIX Finish can be used on E.MIX Easi Base, E.MIX Block Plaster, concrete and rendered surfaces. A harden plastered surface can be painted or wall-papered. Ceramic tiles can be fixed on the E.MIX Finish surface. E.MIX Finish should not be used on painted surfaces.

USAGE :
Interior finishing area only:
- Ceiling finishing
- ALC block wall
- Plastered wall
- Rendered wall
- Hollow concrete block wall

FEATURES AND BENEFITS :
- High workability.
- High water resistance.
- Extra smooth finishing.
- Harden plastered surfaces can be painted or wallpapered.
- Compatible to cementitious E.MIX Render series products.
- Single component: fixed mixing proportion, ensure the quality of work.

PREPARATION :
Ensure the substrate is clean, structurally sound, adequately true and level to achieve specified tolerances, free from contamination, loose particles, grease, lacquer, plastics or traces of foreign materials, and protrusions such as wood peels, nails, excess mortar or any joints with tolerance that cannot be covered by the thickness of plaster.

All cutting, chasing, fixing of concealed conduits, service outlets, fixing pads and the like and making good of the background are completed.

All concrete surfaces should be properly cured prior to plastering.

Substrate is to be moistened overnight and also at the time before the installation. No stagnant or frequent water flow on substrate is allowed immediately prior to installation.

COVERAGE :
Approximately 1.2 kg/ m²/mm thick
Approximately 10.0 m² / 2 mm thick / 25 kg bag