MK Sound IW Series - IW28S - On Wall Speaker
More than four decades of experience and insight have been applied to the design of this truly invisible subwoofer,
based on high-performance 8” woofers specially developed for the M&K Sound V Series subwoofers and ingeniously
adapted to meet the extreme demands of shallow, flush-mount installation while delivering the quantity and quality of
deep bass that consumers and professionals expect from M&K Sound.
The specially tuned, ultra-fast, mass-loaded dual drivers employ aluminum shorting rings for minimal voice coil distortion at long excursion.
Highly rigid paper pulp cones with high inner damping ensure stability at extreme levels and low resonance.
The ultra-linear solid ferrite magnet system provides effective dissipation of heat from the voice coil to prevent power compression from limiting
the acoustic output of the system. The drivers are installed in full contact with the front baffle and the rear of the box for ideal mechanical stability
to minimize driver resonances that can occur due to the limited volume of an In-Wall enclosure.
Sound
| Impedance |
4 ohm |
| Bass Drivers: |
2 x 8” paper pulp |
| Frequency Response: |
28 Hz – 200 Hz, ± 3dB |
| Sensitivity (drive signal 100mVolt VA500 amp) |
88 dB/1m |
Dimensions
| Grille Dimensions (HxW): |
24.48 x 12.44”, 622 x 312 mm |
| Baffle Dimensions (HxW): |
24.25 x 12.04”, 616 x 306 mm |
| Wall Cut Out (HxW): |
22.84 x10.62”, 580 x 270 mm |
| Mounting Depth: |
3.74”, 95 mm |
| Weight: |
24.2 lbs / 11 kg |
Colors
| Grill Finish: |
White Metal, Paintable |
