SikaTop Seal-107 is used for:
•Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork.
•Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack.
•Exterior waterproofing of basement walls in new construction and refurbishment.
•Pore / blowhole filling
Rigid waterproofing of water tanks, swimming pools, etc.
•Sealing fine ''hairline'' cracks in concrete structures not subject to movement.
•Sealing internal basement walls against dampness.
•Leveling mortar for concrete repair works.
•Potable concrete water tanks
•Basements
•Terraces and balconies
•Retaining walls
•Swimming pools and fountains
•RC gutters and planter boxes
•Bathroom floors
•Seawalls
CHARACTERISTICS AND ADVANTAGES:
Pre-batched components - mixes and applies easily
-Slurry or trowellable consistency
-Good adhesion to sound, prepared substrates
-Increased frost and salt resistance
-Protects against concrete carbonation and water penetration
-Non toxic - suitable for contact with drinking water
-Non corrosive to steel and iron
COLOUR:
Part A: white liquid
Part B: Grey powder
Part A+B: Grey slurry
PACKAGING:
25 kg/set
Coverage Depending on type of application, two (2) coats always required.
Three (3) coats may be required in areas of extremely high infiltration.
- 1st coat consumption 1-1.5 kg/m2 on damp surface.
- 2nd coat consumption 0.8 - 1 kg/m2 approx.
Surface Preparation Concrete, mortar and
