RC106 4-Channel Remote Control Frequency 330 / 433 MHz
The RC106 4-Channel Remote Control is a versatile, wireless transmitter commonly used for autogates, garage doors, and home alarm systems, operating at frequencies of 330MHz or 433MHz. It features four distinct buttons (channels) that allow for independent control of multiple devices or different functions of a single gate system.
Key Functions and Features:
- 4-Channel Control: Enables users to control up to four different systems, or separate functions on one system (e.g., button A for left gate, button B for both gates, button C for right gate, button D for lights/siren).
- Frequency Compatibility: Available in 330MHz (often grey) or 433MHz (often blank) variants.
- DIP Switch Setting (Easy Setup): The device features an 8-digit (8-pin) DIP switch inside the casing, allowing users to clone their existing remote by matching the switch positions.
- Fixed Code: It supports fixed code, non-rolling code systems.
- Multi-Functionality: Suitable for swing gates, folding gates, door access systems, and security alarms.
Typical Button Configuration:
UP Button : Both sides of gate (Full open)
LEFT Button : Left side of gate (Motor A)
RIGHT Button : Right side of gate (Motor B)
DOWN Button : Pillar light / Siren
Setup Instructions:
- Open the case of the old, functioning remote control to view the 8-digit DIP switch, labeled with numbers 1-8.
- Open the new RC106 remote control casing.
- Adjust the 8-digit switch on the new remote to match the setting of the old one.
- Close the casing; the remote is ready for use.
